Use at efficient the 16 blade of alloy of thick mill titanium establish milling cutter

  • Time:
  • Click:182
  • source:COCKRIEL CNC Machining
What MAG company rolls out a kind to be used at alloy of thick mill titanium recently is efficient establish milling cutter -- CYCLO CUT Max-Flute. This kind of high density establishs milling cutter to share 16 knives chamfer, the low torque that can realize pair of titanium alloy, tall purify leads treatment. This milling cutter with 2, when the cutting speed milling of the rotate speed of 037rpm, 231 IPM, can achieve 8 In.

The material purify of 3/min is led, and torque is 25 feet of pounds only, treatment power is 9 horsepower only. This company explanation says, in groovy titanium alloy cutting, the heat in metal cutting of generation has 60% - 70% in passing into cutting tool, make cutting tool life shortens considerably thereby. When alloy of titanium of thick mill treatment, Inconel alloy and alloy of other high temperature, to achieve the material purify rate of the hope, normally need uses big torque to undertake machining below low rotate speed. And Max-Flute establishs milling cutter to use more shallow radial to cut deep, decreased to pass into the quantity of heat of cutting tool, allow to undertake machining with higher exterior cutting rate and lesser torque. When be being used with the form a complete set of TrueMill milling software of MAG company, max-Flute establishs what milling cutter can keep constant to cut corner, make the radial cutting on method of whole cutting tool stabler and consistent. Small cutting deep milling is current one of methods of commonly used high speed cutting, max-Flute/TrueMill milling method makes the machine tool can have the treatment of bigger negative charge below taller cutting speed, and use most bolo chamfer density, make milling cutter can achieve rate of the biggest feed. This kind of high rate, big feed, small cut deep thick mill to machined a method to raise material purify to lead, shortened treatment cycle time, prolonged cutting tool life at the same time. Titanium alloy machines very incidental flutter, affect workpiece quality thereby, create the cutting tool be no longer in force that cannot expect likely. Groove used the knife that Max-Flute establishs milling cutter to differ pitch design, can eliminate resonance, reduce flutter, reduced the risk that cutting tool invalidation, workpiece discards as useless. CNC Milling CNC Machining